INTENSE High Performance in
HALF THE PROCESSING TIME!

Check out Marissa’s Instagram!
@marissapusateri

Standard Processing Time: 2hrs & 30 mins
framesi FAST with INTENSE Processing Time: 1hr & 30 Minutes

Products Used:
● framesi FRAMCOLOR 2001 INTENSE 5.00
● framesi FRAMCOLOR 2001 INTENSE 7.024
● framesi STRIKE4 Flat Iron Processing Sheets
● framesi DECOLOR B DIAMOND
● FRAMESI PROFESSIONAL ACTIVATOR 10
● FRAMESI PROFESSIONAL ACTIVATOR 20

Formulas Used:

Formula 1 – All Over Color (Base Color):
FRAMCOLOR 2001 INTENSE 5.00 (30cc/1oz) + FRAMESI PROFESSIONAL ACTIVATOR 20 (60cc)

Formula 2 – Toner for Balayage Pieces:
FRAMCOLOR 2001 INTENSE 7.024 (15cc/1/2oz) + FRAMESI PROFESSIONAL ACTIVATOR 10 (30cc)

STRIKE 4 Formula – Balayage Pieces:
DECOLOR B DIAMOND + FRAMESI PROFESSIONAL ACTIVATOR 20 (1:1.5 mix ratio)

Process:

1. Section hair into three main sections using guest’s natural part as the guide. Starting at the vertex or top of the head, section vertically going downward to the mastoid.
2. Start applying Formula 1 – All Over Color to the roots.

3. Once Formula 1 is applied to the roots, immediately move on to the balayage application. Starting with the back section (section 3) apply V-Shape balayage pieces using the STRIKE4 Formula.

4. Repeat the STRIKE4 Formula application for sections 1 & 2. If going for a highlighted and face-framing look, extend the V- Shape line higher toward the face.

PRO TIP!! When balayaging, add as many pieces as desired.
The more pieces you add in, the lighter the final outcome will be.
 

5. After all of the STRIKE4 Processing Sheets are placed, apply Formula 1 – All Over Color throughout any hair left out of the STRIKE4 Processing Sheets.
6. Once all hair is saturated with Formula 1, start processing the STRIKE4 Processing Sheets.

7. Use a flat iron set at 340ºF and tap each paper 5 times starting at the bottom up toward the top, then again tapping back down with light tension. After tapping, swipe the Flat Iron in an upward motion no more than 5 times.

8. Shampoo, Condition + Blow Dry 80% to prep for toner application.

9. To tone, apply Formula 2 all over focusing on the pre-lightened pieces.
10. Once toned to the desired result, Shampoo with your favorite FRAMESI COLOR METHOD Shampoo GO, Condition, Blow Dry+ Style using FRAMESI COLOR LOVER RAISE THE ROOTS for texture!

 
PRO TIP!! Use FRAMESI COLOR LOVER PRIMER 11 as your thermal protectant & style primer to give your guest a look that will last for days!

Check out the stunning results in HALF THE PROCESSING TIME!