framesi STRIKE4 “How To” Video

GET THIS LOOK IN 30 MINUTES, START TO FINISH!

  • SAVES 45 MINUTES PROCESSING TIME PER SERVICE!
  • FRAMESI STRIKE4 COLOR ME DIAMOND – TECHNIQUE HOW TO

Special Notes —

  1. Apply your lightener to the STRIKE4 sheet BEFORE placing the hair, this will help with control and saturation (allowing you to take thicker sections).
  2. During application, as you get closer to the root area feather your lightener upward to avoid a line of demarcation.

Placement —

  1. Starting in section 1 – begin your first STRIKE4 placement working from the front hairline back. Create your STRIKE4 placements taking ½ inch sliced partings, dropping ¼ inch in between each placement alternating in a brick laying pattern as shown in the diagram. (10 total STRIKE4 placements).
  2. Repeat step 1 for sections 2 & 3, following the face making diagonal placements (5 total STRIKE4 placements in section 2 & 3).
+
=

20
Seconds
To Process
Lighteners

Only Use
Product
Developer
Strength
Mix Ratio
Flat Iron
Temperature
Passes With The
Flat Iron
Decolor B Clay Lightener
20 Volume or Lower
1:1.5
( 1 part Lightener :
1.5 parts developer )
340 °F or 170 °C
5, No higher than 5
Decolor B Diamond
20 Volume or Lower
1:1.5
( 1 part Lightener :
1.5 parts developer )
340 °F or 170 °C
5, No higher than 5
Decolor B No Dust
20 Volume or Lower
1:1.5
( 1 part Lightener :
1.5 parts developer )
340 °F or 170 °C
5, No higher than 5

Directions for use must be followed to ensure the integrity of the hair, no exceptions or substitutions. Do not use on compromised hair. Perform a test strand prior to use.

Download PDF

Schedule Your FREE Class Now!
Call 1-800-321-9648 Ext. 1354

Get this look in 30 minutes start to finish!

Download Resource